What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 03.07.2025 05:08

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

what exactly is a ‘surge’ protector?

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

This is where the MOV conducts again, and dissipated the energy.

Is it okay if I am not interested to talk to any of my relatives as I saw the real faces in my brother's marriage as none of them helped us rather were a kind of disappointment and were talking bad?

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

Barnstars:

Has anyone ever tried any specific strategies to stay warm and cozy indoors during the winter months?

He then describes Rainy Season and Lightning.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

but I think this circuit , shows a few more pieces.

Rubin Observatory’s Stunning Result Proves It’s a 'Game Changer' for Spotting Dangerous Asteroids - Gizmodo

At least they know the answer if they wanted it.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

Ryu Ga Gotoku Studio's Project Century Gets A Strange New Title - GameSpot

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

The MOV will conduct when the voltage exceeds 50% of line voltage.

I post the exact comment here.

Buried for 16 Million Years, Scientists Unearth a Prehistoric Spider So Big, It Might Have Stalked Dinosaurs - Indian Defence Review

(Dc diagram shown, AC is similar).

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

but this device (an Inductor) … impedes the rapid changes in the current.

Does the pro-choice movement realise that all the money used to subside abortions can be used to subsidize daycare and other financial support for single mothers with unplanned pregnancies?

The other is “what does a “fuse” do?”

An AC voltage/ current source, and an ac inductive load.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Why is it common for guys to sleep with 10-20 women then marry a good girl?

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

Here is a simplified AC power diagram.

What is the recommended frequency for using a red light therapy device for skin?

the problem then depends on "how fast does the fuse operate?".

Now when you have a certain ac resistance, then a current flows in a loop.

He then describes the function of a fuse.

Meet the Kardashians' plastic surgeons responsible for Kris Jenner's new face and Kylie's 'teardrop' curves - Business Insider

It also is a device that limits the change in current flow.

But it can get overloaded, and no longer works.

2024–10–10[John johnson John Johnson ]

Sovereignty Wins 2025 Belmont Stakes, Beats Journalism in Final Triple Crown Leg - Bleacher Report

Because the load is inductive, the current lags the voltage.(by a bit).

This is the picture of an electronic coil of wire wound around a core of magnetic material.

What is lightning?

Justin Bieber posts cryptic message about 'transactional relationships' after fans begged him to 'get help' - Page Six

This one hit behind the barn.

At one ohm, the resistor has a maximum of 1 watt power.

For this case there are devices called Metal oxide varistors (MOV).

What are some ways to adjust to sleeping with one's mouth closed if they have been breathing through their mouth due to snoring and obstructive sleep apnea (OSA)?

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

A fuse is a non-resetable over current circuit protector.

Microsoft Installs Emergency Update On Windows PCs - Forbes

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Edit 2024–10.

So, the voltage could go up to 500 volts, and the fuse will not open up.

The McDonald’s Snack Wrap is returning next month - CNN

These are simplified answers to the original question, and does not change anything I wrote above.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

The bolt then partially travels down the line to your home.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

The third is lightning and “how it gets conducted into a home.”

Upvotes:

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

This is where this question deviates from being a 'generic' question, and becomes more specific.

This is 'the assistant's answer'

[old diagram got deleted by accident]

[image of Common-mode choke]

a photo is worth a thousand words.

In schematic diagrams this is the symbol for a fuse:

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

eight

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

These devices are installed between the “hot” and “neutral” and protective ground.

There are two important concepts here.

First Sentence:

nine

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

One is “what exactly is in a ‘surge protector’ ? ”

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

2024–10–14 [Omar Gharbi Omar Gharbi ]

There are three different concepts here that are getting confused.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

A circuit breaker is similar, but is resettable.

It seems Mohan does not understand the difference between a comment and an Answer.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

He then asserts :

so, what happens?

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

2024–10–16 [ OO OLAOYE OYEBODE ]

What does a fuse do?

But… the neutral is now “floating” because of the 1 ohm resistance.

One

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

This device then solves the entire problem.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.